The SHR series high-speed mixer produced by Befulong Machinery has the characteristics of advanced design, convenient operation, safety and reliability, small size, light weight, high efficiency, low energy consumption and low noise. It is your ideal product.
Because of its fast mixing and uniform mixture, the high-speed mixer has good absorption of the reinforcing agent, convenient operation, easy cleaning, sturdy and durable, and compact structure. Today, it has gradually replaced low-speed mixers and is widely used in the production of various plastics industries.
The SHR series high-speed mixer produced by Beforong Machinery has the following remarkable features compared to other manufacturers:
1, the base is cast iron cast, the weight is large, the machine runs well, the stability is longer, the life is longer. Now most manufacturers use welded square steel as the base to save the cost, and some even put cement into the square steel. Increasing the weight of the base can only reduce the cost, and has no benefit to the product itself. When the machine is running, instability, noise, blade wear and the like will occur, and the life of the machine will be greatly reduced.
2, the pot body is made of stainless steel, the inner surface is extremely smooth and hard, with wear resistance, corrosion resistance, and easy to stick. The mixer body has a heating sleeve and a resistance heating coil. The temperature is transmitted to the pot body through the high-flame point heat-conducting oil in the heating jacket, so that the pot body is evenly heated, and the temperature of the material in the pot can be controlled by adjusting the temperature. The outer layer of the jacket has asbestos insulation.
3. The mixer lid is cast from aluminum alloy. The inner surface is polished. After it is lifted from the cylinder, it can be rotated clockwise in the vertical direction (rotation 70 °C). The cover is filled with holes for adding resin, plasticizer, stabilizer and venting holes. . Do not use too much force on the lid to prevent it from hitting the wall. In order to prevent the lid from being covered, the stirring slurry turns to cause personal accidents, and the motor protection is specially set.
4. The mixer deflector is used to enhance the mixing effect. The baffle has an approximately streamlined surface, and the baffle affects the circulating flow of the material. Its most advantageous position depends on the material to be mixed. The deflector can be freely adjusted in the pot body and can be adjusted vertically. The external clamping device fixes the baffle angle. The thermocouple is assembled in the deflector, and its connection is led out through the conduit to the terminal head, connected to the temperature meter of the electric control box, and the material temperature can be fed back to the indicator for automatic control of the discharge port. Unloading
|
The main technical parameters |
||||||
|
model |
Total volume |
Effective volume |
Motor Power |
Spindle speed |
heating method |
Unloading method |
|
SHR-5A |
5 |
3 |
1.2 |
1400 |
Self-friction |
Manual |
|
SHR-10A |
10 |
7 |
2.2/3.2 |
750/1500 |
Self-friction |
Manual |
|
SHR-25A |
25 |
17.5 |
5.5 |
1440 |
Electric heating 2KW |
Manual |
|
SHR-50A |
50 |
30 |
7/11 |
750/1500 (510/1013) |
Electric heating 4KW |
Manual |
|
SHR-100A |
100 |
75 |
14/22 |
525/1050 (650/1300) |
Electric heating 6KW |
Manual |
|
SHR-200A |
200 |
150 |
30/42 |
490/980 |
Electric heating6KW |
Manual |
|
SHR-300A |
300 |
225 |
40/55 |
480/964 |
Electric heating 9KW |
Manual |
|
SHR-500A |
500 |
375 |
55/75 |
441/886 |
Electric heating 9KW |
Manual |
|
SHR-800A |
800 |
560 |
83/110 |
330/660 |
Self-friction |
Manual |
